You are here:LONGLV > Diffuse silicon pressure transmitter > PTL703C flat film micro pressure transmitter

PTL703C flat film micro pressure transmitter

The elastic body of the diaphragm type pressure sensor adopts an imported flush diaphragm silicon core isolation process, and the testing head has no pressure hole. There is no blockage of viscous medium during the measurement process, and the integrated structure design adopts a micro pressure sensing chip. Suitable for pressure measurement and control of viscous media such as chemical coatings, paints, slurries, asphalt, crude oil, etc. under weak pressure.



  • Introduction

    The elastic body of the diaphragm type pressure sensor adopts an imported flush diaphragm silicon core isolation process, and the testing head has no pressure hole. There is no blockage of viscous medium during the measurement process, and the integrated structure design adopts a micro pressure sensing chip. Suitable for pressure measurement and control of viscous media such as chemical coatings, paints, slurries, asphalt, crude oil, etc. under weak pressure.




  • Structure and dimensions

    PTL703C尺寸图


  • Parameter
    Range    0~10,30,50,100kPa,60MPa
    Accuracy    0.25%F·S、0.5%F·S
    Output signal    4~20mA、0~5V、1~5V、0~10V
    Supply voltage    24DCV(9~36DCV)
    Medium temperature    -20~85℃
    Ambient temperature    -20~85℃
    Load Resistance    Current output type: maximum 800Ω;
        voltage output type: greater than 50KΩ
    Insulation resistance    >2000MΩ(100VDC)
    Sealing level    IP65
    Long-term
    stability
        0.1%FS/year
    Vibration effect    In the mechanical vibration frequency 20Hz~1000Hz
        the output change is less than 0.1% FS
    Electrical Interface    Hesman connector
    Threaded connection    M20*1.5


  • Process

    Retail: Contact customer service - Consult product parameters-Confirm product model-Payment-Logistics shipment-Sign for delivery
    Key customers: Contact customer service-Consult industry solutions-Confirm product model parameters-Sign relevant technical contracts-Payment-Logistics shipment-Sign for receipt


  • After-sales

    1. LONGLV provides customers with installation and debugging services, as well as other technical consultations. If necessary, technical personnel can provide on-site technical training. If the customer has any technical questions, the technical personnel will provide a response within 4 hours.
    2. LONGLV products are strictly designed and produced in accordance with the ISO9001 international quality system, with a 1-year warranty for sensor products and a 3-year warranty for instrument products, with a 7-day return and exchange policy and lifelong maintenance.
    (Human damage is not covered by the warranty, and customized products without quality issues are not returned or replaced.)
    3. For returns and exchanges caused by quality issues, Longlv will bear the return and exchange shipping costs. The cost of returns andexchanges for non quality issues will be borne by the customer.
    Note: Quality issues refer to customized parameters such as function, size, specifications, and installation method that are not customized according to customer requirements, do not meet functional requirements, have dimensional errors, and have inaccurate accuracy (excluding within the error range).
    Customized products require confirmation of drawings by both parties before processing and production. If the product does not meet customer requirements, a written objection must be raised within two weeks. If the customer does not raise an objection within the specified time limit, it will be deemed as qualified acceptance.
    If an objection is raised within the deadline and it is confirmed by both parties that it is a product quality issue or production has not been carried out according to the requirements confirmed by both parties, it can be exchanged or refunded. If there are no quality issues and the shipping model andthe contract signed model are complete and correct, no return or exchange service will be provided.
    4. The products returned for repair will have a test result issued within 3 working days and the repair will be completed within 7 working days.
    After sales consultation
    Technical consultation, factory repair, invoices, complaint suggestions, and other related issues. After sales service hotline 021-51601181


  • Room 910, Building 1, Zikun Science and Technology Park, No. 5018
    Hutai Road, Gucun Town, Baoshan District, Shanghai

  • GET IN TOUCH:+86-189-1625-1113

  • E-mail:shlonglv@163.com

Copyright © Shanghai Longlv Electronic Technology Co., Ltd.
cache
Processed in 0.014134 Second.