You are here:LONGLV > Torque control instrument > NJY-105 torque controller

NJY-105 torque controller

The NJY-105 torque controller is equipped with a 4-wire resistance strain bridge sensor, which has total value, net value, peak value, valley value processing and switching display, as well as a 10 point line correction function. Standard 1-point input, different functions can be selected through parameters (reset, tare removal, comparison value output allowed, display locked, or peak valley value reset); The standard alarm is a 2-point OC gate output. Can achieve multi configuration control. Optional transmission and communication functions.

  • Introduction

    The NJY-105 torque controller is equipped with a 4-wire resistance strain bridge sensor, which has total value, net value, peak value, valley value processing and switching display, as well as a 10 point line correction function. Standard 1-point input, different functions can be selected through parameters (reset, tare removal, comparison value output allowed, display locked, or peak valley value reset); The standard alarm is a 2-point OC gate output. Can achieve multi configuration control. Optional transmission and communication functions.


  • Structure and dimensions

    NJY-105尺寸图


  • Parameter
    supply voltage

        100~240VAC  50/60Hz

        10-24VAC  50/60Hz;10-24VDC

    consumed power

       10W以下

        AC:6VA以下;DC:5W以下

    Allowable voltage variation    From 90% to 110% of the power supply voltage
    insulation resistance    ≥100MΩ(500V DC MEGA standard)
    insulation strength    2000V AC (Test condition: 50 / 60Hz, 1 minute)
    antijam    IEC61000-4-2(electrostatic discharge),Ⅲ;
        IEC61000-4-4(electric fast transient pulse group),Ⅲ;
        IEC61000-4-5(surge),Ⅲ
    evels of protection    IP65((GB/T42-2008)
    ambient temperature    Temperature: -10~55 ℃; (Storage: -25~65 ℃)
        Humidity: 35~85% RH;, No condensation
        Indoor, with a height of <2,000 m
    Compare output    2-point OC gate output, 100 mA (MAX)
    Sensor power supply    DC10V±2%,200mA(MAX)
        DC5V±2%,100mA(MAX)
    input impedence    >10MΩ
    conversion mode    Sigma-Delta
    Measurement and control speed

       15. 120 times/second((NJY-105 series)
        240、480、960、1920 times/second((NJY-105F series)

    nolinear    ±0.05%FS
    gain drift    <10ppm/℃
    Max display accuracy    1/10000
    Input signal    Proportion measurement, connected with a 4-wire system strain sensor
    contact input    1 external switch input, can be used for clearing, peeling, allow comparison output, etc


  • Process
    Retail: Contact customer service - Consult product parameters-Confirm product model-Payment-Logistics shipment-Sign for delivery
    Key customers: Contact customer service-Consult industry solutions-Confirm product model parameters-Sign relevant technical contracts-Payment-Logistics shipment-Sign for receipt






  • After-sales

    1. LONGLV provides customers with installation and debugging services, as well as other technical consultations. If necessary, technical personnel can provide on-site technical training. If the customer has any technical questions, the technical personnel will provide a response within 4 hours.
    2. LONGLV products are strictly designed and produced in accordance with the ISO9001 international quality system, with a 1-year warranty for sensor products and a 3-year warranty for instrument products, with a 7-day return and exchange policy and lifelong maintenance.
    (Human damage is not covered by the warranty, and customized products without quality issues are not returned or replaced.)
    3. For returns and exchanges caused by quality issues, Longlv will bear the return and exchange shipping costs. The cost of returns andexchanges for non quality issues will be borne by the customer.
    Note: Quality issues refer to customized parameters such as function, size, specifications, and installation method that are not customized according to customer requirements, do not meet functional requirements, have dimensional errors, and have inaccurate accuracy (excluding within the error range).
    Customized products require confirmation of drawings by both parties before processing and production. If the product does not meet customer requirements, a written objection must be raised within two weeks. If the customer does not raise an objection within the specified time limit, it will be deemed as qualified acceptance.
    If an objection is raised within the deadline and it is confirmed by both parties that it is a product quality issue or production has not been carried out according to the requirements confirmed by both parties, it can be exchanged or refunded. If there are no quality issues and the shipping model andthe contract signed model are complete and correct, no return or exchange service will be provided.
    4. The products returned for repair will have a test result issued within 3 working days and the repair will be completed within 7 working days.
    After sales consultation
    Technical consultation, factory repair, invoices, complaint suggestions, and other related issues. After sales service hotline 021-51601181


  • Room 910, Building 1, Zikun Science and Technology Park, No. 5018
    Hutai Road, Gucun Town, Baoshan District, Shanghai

  • GET IN TOUCH:+86-189-1625-1113

  • E-mail:shlonglv@163.com

Copyright © Shanghai Longlv Electronic Technology Co., Ltd.
no cache
Processed in 0.248385 Second.